Affiliation:
1. Jiangsu Technology Industrialization and Research Center of Ecological Road Engineering, Suzhou University of Science and Technology, Suzhou 215011, China
2. Department of Civil Engineering and Construction, Georgia Southern University, Statesboro, GA 30458, USA
Abstract
The purpose of this study is to investigate the macro and micro properties of stabilized recycled aggregate base layers using gypsum slag cement (GSC) and compare them with ordinary Portland cement (OPC). To achieve this, four levels of recycled aggregate content (0%, 50%, 60%, 70%) and three levels of binder materials (3.5%, 4.5%, 5.5%) were designed, where the binding materials included OPC and GSC. When GSC is used as the binding material with 0% recycled content, two scenarios for the ratio of slag to activator are considered: 4:1 and 4:2. For recycled content of 50%, 60%, and 70%, only the 4:1 ratio is considered. The macro-mechanical properties of the composite material were studied through compaction tests, unconfined compressive strength tests, and indirect tensile strength tests. Microscopic properties were investigated through X-ray diffraction (XRD) and scanning electron microscopy (SEM). Macroscopic test results indicate that, at an equal binder content, GSC exhibits a higher moisture content and maximum dry density compared to OPC. Moreover, the unconfined compressive strength and indirect tensile strength of GSC are higher than those of OPC. Microscopic test results reveal that the hydration products of both binding materials are essentially similar; however, under identical curing conditions, the hydration products of GSC are more abundant than those of OPC.