Unsaturated Polyester Resin Nanocomposites Containing ZnO Modified with Oleic Acid Activated by N,N′-Carbonyldiimidazole

Abstract

Hydrophobic zinc oxide (ZnO) nanoparticles were produced through grafting aminopropyltriethoxysilane (APS) and oleic acid (OA), which was activated by N,N′-carbonyldiimidazole (CDI). The functional group containing ZnO nanoparticles were incorporated into unsaturated polyester (UP) resin, and their dispersibility in the UP matrix and effects on the properties of UP/ZnO nanocomposites were investigated. ZnO nanoparticles modified by APS and OA activated by CDI, (CDI–OA–APS–ZnO), can be homogeneously dispersed as supported by transmission electron microscopy (TEM) investigations and had been encapsulated in the UP resin. CDI–OA–APS–ZnO nanoparticles were embedded in the net structure of the UP composites through chemical bonds between oleic acid, styrene, and polyester resin, which significantly influence the cure reaction of UP resin and the properties of UP composites. Thermogravimetric analysis (TGA) results show that the incorporation of ZnO nanoparticles could improve the thermal stability of UP when thermal cracking temperature exceeds 365 °C. The exothermic peak and the initial temperature of cure reaction of the UP resin decreased with increasing ZnO content. The tensile strength and bending strength of UP/CDI–OA–APS–ZnO nanocomposites increased by 91.4% and 71.3% when 3 wt % CDI–OA–APS–ZnO nanoparticles was added into the composites, respectively, compared with pure UP resin.