Insulating Innovative Geopolymer Foams with Natural Fibers and Phase-Change Materials—A Review of Solutions and Research Results

Abstract

Geopolymers are synthesized using anthropogenic raw materials and waste from the energy industry. Their preparation necessitates an alkaline activator, which facilitates the dissolution of raw materials and their subsequent binding. At present, geopolymers are considered a promising material with the potential to replace conventional cement-based products. This research investigates foamed geopolymer materials based on fly ash, natural fibers, and phase-change materials. The study utilized three distinct types of fibers and two phase-change materials manufactured by Rubitherm Technologies GmbH of Germany. This paper presents the results of the thermal conductivity coefficient and specific heat tests on the finished foams. Additionally, compressive strength tests were conducted on the samples after 28 days. Natural fibers decreased the insulation parameter by 12%, while PCM enhanced it by up to 6%. The addition of fibers increased the compressive strength by nearly 30%, whereas PCM reduced this by as little as 14%. Natural fibers and phase-change materials had an increased heat capacity by up to 35%. The results demonstrated the material’s potential in various industrial sectors, with the primary areas of application being building materials and insulations. The findings illustrate the significant potential of these composites as energetically and environmentally sustainable materials.