Factors Affecting the Time and Process of CMC Drying Using Refractance Window or Conductive Hydro-Drying

Abstract

Intensive research on biodegradable films based on natural raw materials such as carboxymethyl cellulose (CMC) has been performed because it enables the production of transparent films with suitable barrier properties against oxygen and fats. Considering the importance of the production of this type of film at the industrial level, a scalable and continuous drying method is required. Refractance window-conductive hydro drying (RW-CHD) is a sustainable and energy-efficient method with high potential in drying this kind of compound. The objective of this study was to evaluate the factors (CMC thickness, heating water temperature, and film type) and radiation penetration depth that affect drying time and energy consumption. It was found that drying time decreased with increasing temperature and decreasing thickness. Similarly, energy consumption decreased with decreasing temperature and thickness. However, the drying time and energy consumed per unit weight of product obtained were equivalent when drying at any of the thicknesses evaluated. Film type had little effect on time and energy consumption compared to the effects of temperature and CMC thickness. The radiation penetration depth into the CMC was determined to be 1.20 ± 0.19 mm. When the thickness was close to this value, the radiation energy was better utilized, which was reflected in a higher heating rate at the beginning of drying.