Phosphate Additives for Aging Inhibition of Impregnated Activated Carbon against Hazardous Gases

Abstract

Impregnated activated carbons (IACs) used in air filtration gradually lose their efficacy for the chemisorption of noxious gases when exposed to humidity due to impregnated metal deactivation. In order to stabilize IACs against aging, and to prolong the filters’ shelf life, inorganic phosphate compounds (phosphoric acid and its three salts, NaHPO4, Na2HPO4, and Na3PO4) were used as anti-aging additives for two different chromium-free IACs impregnated with copper, zinc, molybdenum, and triethylenediamine (TEDA). Phosphoric acid, monosodium, and disodium phosphate were found to be very efficient in inhibiting the aging of IACs over long periods against cyanogen chloride (the test agent) chemisorption, with the latter being the most efficient. However, the efficiency of phosphate as an anti-aging additive was not well correlated with its ability to inhibit the migration of metal impregnants, especially copper, from the interior to the external surface of carbon granules. Unlike organic additives, the inorganic phosphate additives did not decrease the surface area of the IAC or its physical adsorption capacity for toluene. Using a phosphate additive in IAC used in collective protection and personal filters can improve the safety of the user and the environment and dramatically reduce the need to replace these filters after exposure to humid environments. This has safety, economic, logistical, and environmental advantages.