Effect of Processing Parameters on Mechanical Properties of Deformed and Partitioned (D&P) Medium Mn Steels

Abstract

Deformed and partitioned (D&P) medium Mn steels exhibiting high strength, large ductility, and excellent fracture toughness have been developed recently. The ultra-high dislocation density and transformation-induced plasticity (TRIP) effect are the main mechanisms for their exceptional mechanical properties. The simple processing route to manufacturing D&P steel makes it promising for large-scale industrial applications. However, the exact effect of each processing step on the final mechanical properties of D&P steel is not yet fully understood. In the present work, the effects of processing parameters on the mechanical properties of D&P steels are systematically investigated. The evolution of microstructure, tensile behavior and austenite fraction of warm rolled samples and D&P samples are revealed. Two D&P steels, with and without the intercritical annealing process, are both produced for comparison. It is revealed that the intercritical annealing process plays an insignificant role to the mechanical properties of D&P steel. The partitioning process is extremely important for obtaining large uniform elongation via slow but sustaining strain hardening by the TRIP effect in the partitioned austenite. The cold rolling process is also significant for acquiring high strength, and the cold rolling thickness reduction (CRTR) is extremely critical for the strength–ductility synergy of D&P steels.