Selective Adsorption of Sodium Silicate on the Surface of Bastnaesite and Fluorite in Salicylhydroxamic Acid System under Alkaline Conditions

Abstract

During the flotation separation process of bastnaesite, it is difficult to separate bastnaesite from fluorite effectively. In this present study, sodium silicate (SS) can effectively improve the flotation separation effect of bastnaesite and fluorite in salicylhydroxamic acid (SHA) systemasa. Through relevant analyses, such as Zeta potential measurements, adsorption capacity tests, Fourier transform infrared (FTIR) spectroscopic analyses and X-ray photoelectron spectroscopy (XPS) tests, the selective suppressor of SS on fluorite was proven. At pH 10, the single mineral flotation results show that with the increase of SS dosage, the flotation recovery of fluorite rapidly decreases from 61.5% to 35.31%, while the flotation rate of bastnaesite is still high (recovery is 80.02%). Then, the experiment of artificial mixed ore proved that the flotation separation of fluorite and bastnaesite was effective under the appropriate dosage of inhibitor. The results of potentiodynamic measurement and an adsorption capacity test showed that the SiOOH3− structure of SS more easily reacted with fluorite, which further prevented the adsorption of SHA on the fluorite surface. FTIR test results and XPS analysis further showed that SS had a strong binding effect with the Ca site on the fluorite surface, but a weak binding effect with the Ce site on the bastnaesite surface. Consequently, SS can be used as an effective inhibitor in the flotation separation of fluorite and bastnaesite.