A Phase Canceling Technique to Improve SAW Duplexer Isolation

Abstract

Spectrum resources are becoming increasingly crowded, and the isolation interval between different systems is getting smaller and smaller. This puts forward higher requirements for the duplexer. The duplexer is an important part of the radio frequency front end, and the isolation requirement is becoming higher. This paper presents a phase canceling circuit to improve the performance of the duplexer to meet the requirement of the communication system for isolation. A phase canceling circuit is an effective method to enhance the isolation through use of a surface acoustic wave (SAW) on-chip circuit. It contains a duplexer and a branch. The branch is designed for diminishing the leakage signal of the duplexer. Compared with the leakage signal, the branch consists of two attenuators and a phase shifter to generate a signal which has equal extent and reverse phase. As a result, this method is capable of increasing the isolation of band 5 by 12 dB in the downlink frequency. Meanwhile, it neither affects other factors, such as insertion loss or return loss, nor increases the size of the chip. The phase canceling circuit is expected to promote the quality of duplexer to satisfy the strict requirements in 4G and 5G systems.