Abstract
The article presents the continuation of studies of the features of the wheel movement the traditional and perspective constructive scheme on a rail. Unlike the traditional design, the perspective constructive scheme of the wheel allows independent relative rotation of the support surface wheel and of its guide surface (flange) relative to their common axis of rotation. Previous authors’ works did not take into account the influence of the level of slippage in the main contact of the wheel with the rail on the value of the slippage rate in its flange contact. This article further examines the influence of this factor for both wheel designs. The results of the presented studies confirm the possibility of reducing slippage in the flange contact with the rail for a wheel of a promising design scheme in comparison with a traditional wheel. Reducing the power of friction forces in the contact of the wheel flange of a promising design scheme will reduce the resistance to movement of such a wheel along the rail, especially in curved track sections.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference41 articles.
1. Movement Resistance and Control-Lability of Rail Vehicles;Tkachenko,2017
2. Kinematic Resistance to the Movement of Rail Vehicles;Tkachenko,1996
3. The possibility of reducing kinematic slip with two-point contacting with rail wheel railway vehicle;Mikhailov;TEKA Komisji Motoryzacji i Energetyki Rolnictwa,2013
4. Reduction of Kinematic Resistance To Movement Of the Railway Vehicles
5. Research of possibilities of reducing the driving resistance of a railway vehicle by means of the wheel construction improvement
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献