Abstract
External Thermal Insulation Composite Systems (ETICS) are the most common technical solution to improve the thermal efficiency of existing buildings. In the light of the applicable regulations, ETICS are kits that apply only one type of thermal insulation material. All typically used ETICS introduced into the market classify as non-combustible. Despite that, the emerging recommendations in some countries point to the need for the introduction of barriers of non-combustible material such as mineral wool (MW) around the openings and horizontal isolation barriers around the building between different floors to prevent fast fire spread. That raises an important question: Do MW partitions significantly improve the fire safety of the building and balance other aspects such as the sustainability and durability of such combined insulation materials with different properties? Here, we assessed the impact of MW partitions in EPS-based ETICS on the spread of the fire according to the requirements of BS 8414-1: 2020. Four different variants were investigated. The study showed slight differences in average temperatures and the size of the polystyrene melting area for various insulation variants with the introduced horizontal MW partitions. The introduction of MW partitions shows no significant benefits or improvement of fire safety of the investigated ETICS.
Subject
Management, Monitoring, Policy and Law,Renewable Energy, Sustainability and the Environment,Geography, Planning and Development
Reference34 articles.
1. Regulation (EU) No. 305/2011 of the European Parliament and of the Council
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32011R0305
2. Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products;Off. J. Eur. Communities,1989
3. Carbon footprint of thermal insulation materials in building envelopes
4. Environmental burdens of External Thermal Insulation Systems. Expanded Polystyrene vs. Mineral Wool: Case Study from Poland
5. Influence of Rendering Type on the Environmental Characteristics of Expanded Polystyrene-Based External Thermal Insulation Composite System