3D VSP Imaging Using DAS Recording of P- and S-Waves in Vertical and Lateral Well Sections in West Texas

Abstract

A 3D vertical seismic profiling (VSP) survey was acquired using a distributed acoustic sensing (DAS) system in the Permian Basin, West Texas. In total, 682 shot points from a pair of vibroseis units were recorded using optical fibers installed in a 9000 ft (2743 m) vertical part and 5000 ft (1524 m) horizontal reach of a well. Transmitted and reflected P, S, and converted waves were evident in the DAS data. From first-break P and S arrivals, we found average P-wave velocities of approximately 14,000 ft/s (4570 m/s) and S-wave velocities of 8800 ft/s (3000 m/s) in the deep section. We modified the conventional geophone VSP processing workflow and produced P–P reflection and P–S volumes derived from the well’s vertical section. The Wolfcamp formation can be seen in two 3D volumes (P–P and P–S) from the vertical section of the well. They cover an area of 3000 ft (914 m) in the north–south direction and 1500 ft (460 m) in the west–east direction. Time slices showed coherent reflections, especially at 1.7 s (~11,000 ft), which was interpreted as the bottom of the Wolfcamp formation. Vp/Vs values from 2300 ft (701 m) –8800 ft (2682 m) interval range were between 1.7 and 2.0. These first data provide baseline images to compare to follow-up surveys after hydraulic fracturing as well as potential usefulness in extracting elastic properties and providing further indications of fractured volumes.