Affiliation:
1. School of Mechanical Engineering, Tianjin University, Tianjin 300350, China
2. School of Mechanical and Electrical Engineering, Hainan University, Haikou 570228, China
Abstract
The air suspension system’s superior variable stiffness, low vibration frequency, and resistance to road impacts significantly elevate both the comfort of vehicle occupants and the overall ride quality. By effectively controlling the air suspension system, its superior characteristics can be fully exploited to enhance the overall performance of vehicles. However, the parameter tuning process of the fuzzy PID controller for air suspension involves subjectivity and blindness, which affects the performance of the suspension system. To overcome these shortcomings, a control strategy combining genetic algorithms with fuzzy PID control is proposed. This strategy involves a genetic algorithm-optimized fuzzy PID air suspension control approach specifically targeting the fuzzy PID controller for air suspension. A 1/4 two-degree-of-freedom air suspension fuzzy PID controller is designed in MATLAB 2019a, utilizing genetic algorithms to optimize the PID parameter tuning process. The ride comfort of the fuzzy PID air suspension after tuning is then investigated. In the study of ride comfort on Class B road surfaces, the simulation and experimental results were consistent. Using a genetic algorithm to optimize a fuzzy PID-controlled air suspension resulted in reductions of the root mean square values for vertical body acceleration, suspension deflection, and wheel dynamic load by 30%, 26%, and 9%, respectively, compared to passive suspension. These reductions are further improvements over the corresponding indices controlled by the fuzzy PID alone, which decreased by 23%, 18%, and 6%, respectively. Thus, the control effect of the genetic algorithm-optimized fuzzy PID is superior to that of the fuzzy PID control. This demonstrates that the fuzzy PID control of air suspension optimized by genetic algorithms can further improve the comfort of vehicle occupants and the ride comfort of driving, providing a reference for active control of air suspension systems.
Funder
Natural Science Foundation of Hainan Province
Reference23 articles.
1. Intelligent Manufacturing Technology of New Energy Vehicle Lightweight Chassis Suspension System;Ming;Mach. Build. Autom.,2021
2. Chao, L.Y. (2018). Suspension System Optimization and Study on Control of the Electric Vehicle. [Master’s Thesis, Qingdao University of Science].
3. Lei, S.S. (2019). Research on Control Strategy of Charging and Deflating Characteristics of Electronically Controlled Active Air Suspension. [Master’s Thesis, Taiyuan University of Technology].
4. Nonlinear adaptive sliding-mode control of the electronically controlled air suspension system;Rui;Int. J. Adv. Robot. Syst.,2019
5. Hybrid Fuzzy-PID Control Development for a Truck Air Suspension System;Nazemian;SAE Int. J. Commer. Veh.,2020