Analytical and Experimental Investigation of Windage–Churning Behavior in Spur, Bevel, and Face Gears

Abstract

This paper presents comparable sets of the no-load power loss as a product of windage and churning behaviors of a family of various rotating parts (i.e., disc, spur gear, straight bevel gear, and orthogonal face gear). Experimental measurements were carried out under pure air only and under partial immersion in oil to qualify and quantify the windage and churning effects of no-load power losses of a family of spur, bevel, and face gears along with a representative disc as the baseline. Aiming at exploring the influence of gear teeth on the total no-load power losses, two different theoretical analytical approaches are introduced to account for the churning contributions, by which the total power losses are estimated. Both analytical approaches compare well with the experimental findings. Furthermore, a spatial intersecting cross-axis gear (e.g., straight bevel gear and orthogonal face gear) results in higher no-load power losses than that of a representative disc or a parallel-axes gear. The significance of gear teeth (gear vs. disc) on windage behavior is presented, as well as the gear windage effects on the churning phenomenon in a high-speed splash-lubricated gear.