Effect of Micro- and Macro-Mechanical Characteristics of Jujube Bark on Jujube Girdling Quality

Abstract

Jujube girdling is an important method to improve the yield and quality of jujube fruit. However, girdling usually causes the tearing of jujube bark, resulting in the slow healing and even death of jujube trees. These problems directly affect the economic benefits of jujube planting. In this paper, in order to reveal the tearing mechanism of jujube bark caused by girdling, and provide the basic mechanical parameters of jujube bark for the research and development of automatic girdling equipment, the structure and mechanical characteristics of jujube bark were studied through theory and experimental methods. The results of microscopic observation showed that jujube bark is a biological composite material mainly composed of the phloem, periderm and epidermis. Furthermore, a mathematical model-based analysis of the growth stress of jujube bark showed that growth stress can be regarded as a biaxial stress state, which can promote the longitudinal tearing of jujube bark during girdling. The tensile test results of jujube bark showed that jujube bark belongs to the category of anisotropic and biologic material. Its longitudinal and transverse mechanical characteristics are significantly different. The maximum longitudinal tensile load was in the range of 105.9~293 N, the longitudinal tensile strength was 16.3 MPa and the elastic modulus was 255.6 MPa. The average transverse tensile load was only 27.9% of the longitudinal tensile load. The transverse tensile strength was 3.5 Mpa and its elastic modulus was 724.14 MPa. The transverse cutting test of jujube bark showed that the average cutting force was 118.2 N and the cutting strength was 9.8 MPa. The results of this study showed that both the growth stress and the anisotropic natural polymer of jujube bark have adverse effects on girdling. Subsequently, issues relating to the selection of appropriate girdling tools and the matters needing attention in the process of the girdling operation were proposed, so as to guide the correct application of girdling technology. In addition, some suggestions on the research and development of girdling tools in the future are put forward.