Affiliation:
1. State Key Laboratory of Safety and Health for Metal Mines, Maanshan 243000, China
2. Zijin Mining Group Co., Ltd., Xiamen 572000, China
3. School of Resources & Environment and Safety Engineering, University of South China, Hengyang 421001, China
Abstract
Based on the pressure of environmental protection, more and more scientific researchers are trying to reuse aluminum–silicon-rich industrial wastes. In this study, activated lithium-slag and lead–zinc tailings were used as raw materials to prepare geopolymers at ratios of 3:7, 1:1, and 7:3. These geopolymers were initially cured for 12 h at 25 °C, 50 °C, 75 °C, and 100 °C and were then cured at room temperature to the specified ages. The compressive strength of each group of geopolymers was tested at the ages of 3 days, 7 days, and 28 days. The optimal group of samples was selected, that is, those with a ratio of lithium-slag to lead–zinc tailings of 7:3 and an initial curing temperature of 75 °C. After that, the heavy metal leaching test and porosity analysis test were carried out on the optimal group of samples, and the curing effect was considered to meet the requirements of the Chinese specifications. In addition, in order to reveal the mechanism of the chemical reaction, scanning electron microscopy and X-ray diffraction (XRD) were used to study the microstructure and hydration products of the C3 group cured samples. This study provides a new concept for the reuse of industrial wastes such as lithium-slag and fine-tailings.
Funder
State Key Laboratory of Safety and Health for Metal Mines
Subject
Management, Monitoring, Policy and Law,Renewable Energy, Sustainability and the Environment,Geography, Planning and Development,Building and Construction
Reference29 articles.
1. Hazardous area reconstruction and law analysis of coal spontaneous combustion and gas coupling disasters in goaf based on DEM-CFD;Zou;ACS Omega,2023
2. Fabrication of green one-part geopolymer from silica-rich vanadium tailing via thermal activation and modification;Bao;Int. J. Miner. Metall.,2022
3. Effect of elevated temperature on the microstructure of metakaolin-based geopolymer;Adjei;ACS Omega,2022
4. Kumar, V.S., Ganesan, N., Indira, P.V., Murali, G., and Vatin, N.I. (2022). Flexural Behaviour of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beams. Sustainability, 14.
5. Fly Ash/Blast Furnace Slag Geopolymer Repair System as a Sustainable Solution for the Maintenance of an Existing Bridge: Materials Design and Influence on Shear Capacity under Seismic Conditions;Nestovito;Adv. Mat. Res.,2015
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献