Simulated and Verification of Mass and Heat Transfer Coupled Model of Jujube Slices Dried by Hot Air Combined with Radio Frequency Heat Treatment at Different Drying Stages

Abstract

This study investigates the impact of radio frequency (RF) heat treatment on heat and mass transfer during the hot air drying of jujube slices. Experiments were conducted at different drying stages, comparing single-hot air drying with hot air combined with RF treatment. Numerical models using COMSOL Multiphysics® were developed to simulate the process, and the results were compared to validate the models. The maximum difference between the simulated value of the center temperature and the experimental value was 6.9 °C, while the minimum difference was 0.1 °C. The maximum difference in average surface temperature was 1.7 °C, with a minimum of 0.3 °C. The determination coefficient (R2) between the simulated experimental values of HA and the early (E-HA + RF), middle (M-HA + RF), and later (L-HA + RF) groups was 0.964, 0.987, 0.961, and 0.977, respectively. The study demonstrates that RF treatment reduces drying time, enhances internal temperature, promotes consistent heat and mass transfer, and accelerates moisture diffusion in jujube slices. Furthermore, the later the RF treatment is applied, the greater the increase in internal temperature and the faster the decrease in moisture content. This research elucidates the mechanism by which RF heat treatment influences heat transfer in hot air-dried jujube slices.