Low-Density Particleboards Modified with Blowing Agents—Characteristic and Properties

Abstract

Although lightweight particleboards have been commercially available for years, they still have a number of disadvantages, including difficulty to process, brittleness, low impact strength, and other mechanical resistance. The aim of the paper was to determine the possibility of producing particleboards of reduced density (dedicated for furniture industry) as a result of using blowing agents from the group of hydrazides, dicarboxamides, or tetrazoles, which were modifiers of the adhesive resin used for bonding the particles of the core layer of three-layer particleboards. The concept presents the possibility of producing low-density particleboards in a standard technological process by modifying the adhesive resin, which has not been practiced by others until now. Analysis of the results of testing the particleboards properties with various types of modifiers (blowing agents), glue content (high 10%/12% and low 8%/10%), differing in glue dosing method, and different particle sizes allowed concluding that the most satisfactory effect was found in particleboards made of the variant modified with p-toluenesulfonyl hydrazide. This variant was characterised by the highest mechanical properties (bending strength, modulus elasticity, and internal bond strength) with high dimensional stability. The presented technology proposal can be applied in the industry.