Affiliation:
1. Department of Marine Engineering, National Taiwan Ocean University, Keelung 20224, Taiwan
Abstract
The engine performance and emission characteristics of burning emulsions of soybean oil biodiesel in a compression-ignition diesel engine prepared through the phase inversion temperature method were compared with those of neat soybean oil biodiesel and the emulsion prepared by the mechanical homogenization method. The engine torque was set constantly at 98 N·m with varying engine speeds. The experimental results show that the emulsion prepared by the method of phase inversion temperature had higher O2 and NOx emissions, a higher excess air ratio, a higher exhaust gas temperature, and a higher brake fuel conversion efficiency than the emulsion prepared by the mechanical homogenization method, which had lower CO and CO2 emissions, a lower equivalence ratio, and lower brake-specific fuel consumption. While the neat soybean oil biodiesel was found to have the lowest fuel consumption rate, brake-specific fuel consumption, and CO and CO2 emissions, it had the highest exhaust gas temperature and brake fuel conversion efficiency, NOx and O2 emissions, and excess air ratio among those three fuels. Therefore, the phase inversion temperature method is considered promising for preparing fuel emulsions as an alternative to petro-derived diesel for compression-ignition engines.
Funder
National Science and Technology Council, Taiwan
National Taiwan Ocean University, Taiwan
Subject
Process Chemistry and Technology,Chemical Engineering (miscellaneous),Bioengineering
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献