Simplified Evaluation of Plastic Rotation Demand for Existing EBFs Equipped with Short Links

Abstract

The seismic events that occurred in the last decades have highlighted the importance of a correct design of the structures in seismic areas and the seismic inadequacy of a large part of the built heritage. Modern codes are still lacking in terms of prescriptions for the evaluation of the seismic performance of existing buildings. The present work proposes a simplified method for the evaluation of the demand in terms of plastic rotation for short links of steel Eccentrically Braced Frames (EBFs). A relationship for the evaluation of the demand, that exploits elastic analysis and rigid-plastic analysis extended to the second-order effects, is proposed. The calibration of this relationship was carried out on 420 EBFs equipped with short links designed according to three different approaches. The 420 frames have been also used to analyze the behavior in the plastic range of EBF type structures equipped with short links. The study also provides an extensive analysis on the influence of plastic redistribution capacity on the demand in terms of plastic rotations of links, corresponding to the achievement of the maximum bearing capacity. The obtained relation can be exploited as an assessment tool by comparing the demand with the link capacity. Moreover, from a performance-based design point of view, the same can be used for predicting the required ultimate plastic rotation as a function of the plastic redistribution capacity of the structure.