Abstract
Several approaches have been developed to measure instantaneous friction between the piston assembly and cylinder in internal combustion (IC) engines, such as floating-liner, reciprocating liner, instantaneous mean effective pressure (IMEP), fixed sleeve, and (P-ω) method and tribological bench tests. However, the “floating-liner method” and the “(IMEP) method” are the most common methods used to measure instantaneous friction between the piston assembly and IC engines. This paper critically evaluates different approaches to the design of the “floating-liner”. The paper begins by discussing piston assembly frictional losses and their significance and then discuss the development of instantaneous piston-friction measurements. After that, it reviews the main design challenges in the floating-liner approach. “Methods of cylinder sealing” and “force balancing methods” are also reviewed. Design challenges associated with firing operation were presented. Floating-liner designs were classified into different categories with a detailed presentation of the features of each. The paper ends by presenting a range of broad recommendations for further work which would benefit future designs.
Subject
Surfaces, Coatings and Films,Mechanical Engineering
Reference64 articles.
1. On the way to 130gCO2/km—Estimating the future characteristics of the average European passenger car
2. Global energy consumption due to friction in passenger cars
3. Tribology Micro & Macro Economics: A Road to Economic Savings;Jost;Tribol. Lubr. Technol.,2005
4. Global impact of friction on energy consumption, economy and environment;Holmberg;FME Trans.,2015
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献