Affiliation:
1. College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China
Abstract
Nickel-based superalloy GH4169 is a material with strong mechanical properties and is difficult to process. In order to reduce tool wear during material processing and improve the workpiece surface processing quality, based on the finite element simulation software DEFORM, the influence of n, ap, and fz parameters on tool wear during carbide tool milling GH4169 was studied, and a simulation of an orthogonal experimental model was established. The prediction model of tool wear was obtained. The ultrasonic vibration milling was compared with ordinary milling, and the improvement degree of different coating materials on carbide tool wear was explored. The results showed that the ultrasonic vibration signal is helpful to reduce tool wear, improve the surface quality of the workpiece, and improve the stability of the milling process. TiAlN/TiN (WC)-composite-coated tools have good cutting performance, help to reduce tool temperature, reduce tool wear, and improve tool life.
Funder
National Natural Science Foundation of Jilin Province, China
Subject
Surfaces, Coatings and Films,Mechanical Engineering
Reference31 articles.
1. High speed machining of aero-engine alloys;Ezugwu;J. Braz. Soc. Mech. Sci. Eng.,2004
2. Development and prospect of the aircaft digital assembly technology;Mei;Acronautical Manuf. Technol.,2015
3. Research on the status quo of aircraft digi tal assembly techmology in China;Chu;J. Xi’an Acronautical Univ.,2016
4. An Overview of the Machinability of Aero Engine Alloys;Ezugwu;J. Mater. Process. Technol.,2003
5. A review of developments towards dry and high speed machining of Inconel 718 alloy;Dudzinski;Int. J. Mach. Tools Manuf.,2004