Experimental Analysis of Friction and Wear of Self-Lubricating Composites Used for Dry Lubrication of Ball Bearing for Space Applications

Abstract

Lubricating space mechanisms are a challenge. Lubrication must be sustained in different environments, for a very long period of time, and without any maintenance possible. This study focuses on the self-lubricating composite used in the double transfer lubrication of ball bearing. Ball/races contacts are lubricated via the transfer of materials from the cage that is made of the composite. A dedicated tribometer has been designed for the study. A specificity of the tribometer is to not fully constrain the composite sample but to let it move, as the cage would do in the bearing. Four composites (PTFE, MoS2, glass or mineral fibers) where tested in ultrahigh vacuum and humid air environments. Transfer was achieved with morphologies and composition similar to what is observed on real bearings. Adhesion measurements performed on composite materials before and after friction allowed one to explain the differences in tribological behaviors observed (transfer quality and contact instabilities). Beyond strengthening the composites, fibers are shown to be critical in trapping mechanically and chemically the transferred material to lubricate and prevent instabilities. Equilibrium between internal cohesion of transferred material, and adhesion to counterparts must be satisfied. Mass spectrometry showed that water appears also critical in the establishment of stable transfer film, even in vacuum.