Research on Wear of Micro-Textured Tools in Turning GH4169 during Spray Cooling

Abstract

In this study, the wear resistance of micro-textured tools was explored. Micro-textured tools with different morphologies were used in turning GH4169 during spray cooling. The tool wear on the rake face of the different micro-texture morphologies was investigated through simulation and experiments. Firstly, based on the existing research on bionics, micro-textures with five different morphologies were designed on the rake face of carbide tools. A simulation model of cutting GH4169 during spray cooling was established, and the tools with designed micro-textures were used in it. The influence of the different micro-texture morphologies on the tool wear was analyzed. Secondly, the designed micro-textured tools with five different morphologies were produced using a femtosecond laser. Cutting experiments were conducted using the micro-textured tools during spray cooling. The wear area of the rake face was measured based on the infinitesimal method, and the optimal morphology with the best anti-wear ability was obtained. This study provides technical support for the design and development of micro-textured tools with an improved cutting performance, and contribute to the promotion and application of micro-textured tools.