Analysis of Deformation and Stresses of a Lightweight Floor System (LFS) under Thermal Action

Abstract

The lightweight floor system (LFS) with a heating coil is one of many types of radiant heating systems. It differs from most of the others, as it has a much higher thermal efficiency at low flow temperature. To verify whether adhesive mortars can safely connect the ceramic floor with the insulating substrate, the deformations and stresses values of all light system layers under thermal action should be checked and compared to their maximum strengths. For this purpose, an LFS test field was conducted using the strain gauges and digital measurement techniques, and floor displacements and deformations were determined. The results obtained from the tests were confirmed by finite element method calculations. It was also found that the stress of each floor component was much lower than their strength. This proves that the LFS with a heating coil, without metal lamellas, meets the safety regulation for use. The results of the analysis can be useful in the design of heated/cooled LFSs.