Structural Analysis and Lightweight Optimization of a Buoyant Rotor-Type Permanent Magnet Generator for a Direct-Drive Wind Turbine
Author:
Hwang Joon-Ha1, Bang Deok-je2, Jang Gang-Won1
Affiliation:
1. Department of Mechanical Engineering, Sejong University, 98 Gunja-dong, Gwangjin-gu, Seoul 143-747, Republic of Korea 2. Korea Electrotechnology Research Institute, 12 Bulsan-ro, Seongsan-gu, Changwon, Gyeongnam 642-120, Republic of Korea
Abstract
This study presents a structural analysis and optimization for the lightweight design of a buoyant rotor-type permanent magnet (BRPM) generator, which was first presented in Bang (2010), and compares its structural performance to that of a conventional generator with a spoke arm-type rotor and stator. The main benefit of a BRPM generator is that it can be constructed as a bearingless drive system, free from the mechanical failure of rotor bearings, by using a buoyant rotor. Additionally, the deformation of the generator by blade vibration can be effectively suppressed using joint couplings between the blades and the rotor. For design optimization, the objective is set as the mass of the rotor and the stator, and the maximum deformation of the airgap clearance between the rotor and the stator by external forces is constrained below 10% of the gap width. The commercial software OptiStruct is used for the analysis and optimization. In this investigation, the analysis and optimization are conducted for a 10 MW wind turbine generator. However, the proposed methods can be extended to larger generator designs without requiring considerable modification. The mass of the optimized 10 MW BRPM generator is 160.7 tons (19.3 tons for the rotor and 141.4 tons for the stator), while that of an optimized conventional spoke arm-type generator is 325.6 tons.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference25 articles.
1. Bensalah, A., Barakat, G., and Amara, Y. (2022). Electrical generators for large wind turbine: Trends and challenges. Energies, 15. 2. Bošnjaaković, M., Katinić, M., Santa, R., and Marić, D. (2022). Wind turbine technology trends. Appl. Sci., 12. 3. Agrebi, H.Z., Benhadj, N., Chaieb, M., Sher, F., Amami, R., Neji, R., and Mansfield, N. (2021). Integrated optimal design of permanent magnet synchronous generator for smart wind turbine using genetic algorithm. Energies, 14. 4. Park, H.J., Kang, H.L., Ahn, D.G., and Han, S.H. (2023). Optimal shape design of direct-drive permanent magnet generator for 1kW-class wind turbines. Appl. Sci., 13. 5. Tartt, K., Amiri, A.K., McDonald, A., and Jaen-Sola, P. (2018). Structural optimisation of offshore direct-drive wind turbine generators including static and dynamic analyses. J. Phys. Conf. Ser., 012040.
|
|