Author:
Xu Yaozong,Li Tao,Tang Xinming,Zhang Xiang,Fan Hongdong,Wang Yuewen
Abstract
Intensive and large-scale underground coal mining has caused geological disasters such as local ground subsidence, cracks and collapse in the Datong coalfield, China, inducing serious threats to local residents. Interferometric synthetic aperture radar (InSAR) has the capability of surface deformation detection with high precision in vast mountainous areas. DInSAR, stacking-InSAR and SBAS-InSAR are commonly used InSAR-related deformation analysis methods. They can provide effective support for mine ecological security monitoring and prevent disasters. We use the three methods to conduct the deformation observation experiments in the Datong coalfield. Sentinel-1A data from November 2020 to October 2021 are used. As a result, a total of 256 deformations in the Datong coalfield were successfully detected by the three methods, of which 218 are mining deformations, accounting for 85% of the total deformations. By comparing the results of the three methods, we found that DInSAR, stacking-InSAR, and SBAS-InSAR detected 130, 256, and 226 deformations in the Datong coalfield, respectively, while the deformations caused by coal mining were 128, 218, and 190. DInSAR results with long spatiotemporal baselines are seriously incoherent. SBAS-InSAR results of displacement rate are more precise than stacking-InSAR, and the mean standard deviation is 1.0 mm/a. However, for areas with lush vegetation or low coherence, SBAS-InSAR has poor performance. The detection deformation area results of DInSAR and SBAS-InSAR are subsets of stacking-InSAR. The displacement rates obtained by stacking-InSAR and SBAS-InSAR are consistent; the mean difference in the displacement rate between the two methods is 2.7 mm/a, and the standard deviation is 5.1 mm/a. The mining deformation locations and their shapes in the study area can be identified with high efficiency and power by stacking-InSAR. Therefore, with a comprehensive understanding of the advantages and limitations of the three methods, stacking-InSAR can be an effective and fast method to identify the level, location and range of mining deformation in lush mountainous areas.
Funder
National Key R&D Program of China
National Natural Science Foundation of China
The Open Research Fund of Jiangsu Key Laboratory of Resources and Environmental Information Engineering, CUMT
Subject
General Earth and Planetary Sciences
Cited by
17 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献