Abstract
Medium and highly sulfidic tailings are high-volume wastes that can lead to severe environmental damage if not properly managed. Due to the high content of sulfide minerals, these tailings can undergo weathering if put in contact with oxygen and water, generating acid mine drainage (AMD). The moderate-to-high sulfide content is also an important technical limitation for their implementation in the production of construction materials. This paper reviews the use of sulfidic tailings as raw material in construction products, with a focus on cement, concrete, and ceramics. When used as aggregates in concrete, this can lead to concrete degradation by internal sulfate attack. In building ceramics, their implementation without prior treatment is undesirable due to the formation of black reduction core, efflorescence, SOx emissions, and their associated costs. Moreover, their intrinsic low reactivity represents a barrier for their use as supplementary cementitious materials (SCMs) and as precursors for alkali-activated materials (AAMs). Nevertheless, the production of calcium sulfoaluminate (CSA) cement can be a suitable path for the valorization of medium and highly sulfidic tailings. Otherwise difficult to upcycle, sulfidic tailings could be used in the clinker raw meal as an alternative raw material. Not only the SO3 and SiO2-rich bulk material is incorporated into reactive clinker phases, but also some minor constituents in the tailings may contribute to the production of such low-CO2 cements at lower temperatures. Nevertheless, this valorization route remains poorly explored and demands further research.
Subject
Management, Monitoring, Policy and Law,Renewable Energy, Sustainability and the Environment,Geography, Planning and Development
Cited by
22 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献