Mechanical Behavior of Concrete Prepared with Waste Marble Powder

Abstract

Marble production and processing generates a large amount of marble powder waste that has great potential for cementitious material. This paper investigates the application of waste marble powder with different replacement ratios of cement in concrete and experimentally studies the physical and mechanical properties of this green concrete type. Artificial marble powder and original marble powder are used at different replacement levels. The effect of different kinds of marble powder and its replacement ratio on the mechanical properties of concrete are discussed. The results show that the compressive strength, splitting tensile strength, and flexural strength change significantly when the substitution rate of marble powder exceeds 10%; the strength decreases as the substitution rate increases. The usage of artificial marble powder plays a weakening role on concrete performance due to its resin composition when compared to the performance using original marble powder. The stress–stain curves of the two types of marble powder concrete are compared. For concrete, by using the original marble powder, the variation of strain value is not obvious when the marble powder replacement ratio is less than 20%, but for concrete by using artificial marble powder, the peak and ultimate strain decrease significantly with the replacement ratio of marble powder increase.