Inspection of Spot Welded Joints with the Use of the Ultrasonic Surface Wave

Abstract

Spot welded joints play a crucial role in the construction of modern automobiles, serving as a vital method for enhancing the structural integrity, strength, and durability of the vehicle body. Taking into account spot welding process in automotive bodies, numerous defects can arise, such as insufficient weld nugget diameter. It may have evident influence on vehicle operation or even contribute to accidents on the road. Hence, there is a need for non-invasive methods that allow to assess the quality of the spot welds without compromising their structural integrity and characteristics. Thus, this study describes a novel method for assessing spot welded joints using ultrasound technology. The usage of ultrasonic surface waves is the main component of the proposed advancement. The study employed ultrasonic transducers operating at a frequency of 10 MHz and a specially designed setup for testing various spot welded samples. The parameters of the spot welding procedure and the size of the weld nugget caused differences in the ultrasonic surface waveforms that were recorded during experiments. One of the indicators of weld quality was the amplitude of the ultrasonic pulse. For low quality spot welds, the amplitude amounted to around 25% of the maximum value when using single-sided transducers. Conversely, for high-quality welds an amplitude of 90% was achieved. Depending on the size of the weld nugget, a larger or smaller amount of wave energy is transferred, which results in a smaller or larger amplitude of the ultrasonic pulse. Comparable results were obtained when employing transducers on both sides of the tested joint, as an amplitude ranging from 13% for inferior welds to 97% for superior ones was observed. This research confirmed the feasibility of employing surface waves to assess the diameter of the weld nugget accurately.