Study on Slag Forming Route of Dephosphorization in Combined Blown Converter

Abstract

In order to achieve the purpose of high-efficiency dephosphorization by single-slag method during the combined blown converter steelmaking process, the CaO-SiO2-FetO-MgO-MnO-P2O5 slag system was taken as the research object, and the slag-forming route of dephosphorization was studied. The effects of slag compositions on the liquidus and the contour map of phosphorus distribution ratios (recorded as Lp) were calculated by thermodynamics software FactSage, and then the theoretic slag-forming route of dephosphorization was obtained. The effects of slag compositions on dephosphorization rate and Lp were studied by a high-temperature experiment. Based on the results of the theoretic calculation and high-temperature experiment, the actual slag-forming route of dephosphorization by the single-slag process in the combined blown converter was obtained: The initial slag composition should be around 15.0%CaO-44.0%SiO2-41.0%FetO. The composition of high-efficiency dephosphorization slag should be around 50.8%CaO-24.2%SiO2-25%FetO. The final slag composition should be around 65.6%CaO-28.3%SiO2-6.1%FetO. After using the actual slag-forming route in the production, the dephosphorization rate was increased by 3.6%, and the consumption of slagging materials was reduced by 3.78 kg/t.