Abstract
The objective of this work is to present the numerical simulation of the air-bending process of DC01 steel. There are plenty of works concerned with assessing the springback phenomenon in the bending process also using anisotropic material models (Hill’s model is widely used). However, very few recent publications are concerned about the fatigue life assessment of bent products. As ensuring the proper fatigue resistance of products is vital for increasing safety and widening the service intervals there is certainly a need to perform investigations in this field. In this work, the air bending simulation of anisotropic DC01 steel with the usage of Barlat’s plastic anisotropy model was presented. Together with springback analysis and the equivalent plastic strain cumulation during incremental bending. Strain cumulation is believed to be an important factor in predicting fatigue life. It was shown that the strain development rate depends on the bending process parameters, especially from the bending line orientation to the sheet rolling direction.
Subject
General Materials Science
Reference29 articles.
1. Mulidrán, P., Spišák, E., Tomáš, M., Slota, J., and Majerníková, J. (2020). Numerical Prediction and Reduction of Hat-Shaped Part Springback Made of Dual-Phase AHSS Steel. Metals, 10.
2. Double-Action Bending for Eliminating Springback in Hat-Shaped Bending of Advanced High-Strength Steel Sheet;Lawanwong;Int. J. Adv. Manuf. Technol.,2020
3. Bendability Assessment of High Strength Aluminum Alloy Sheets via V-Die Air Bending Method;Hong;J. Mater. Res. Technol.,2022
4. Bendability of Advanced High Strength Steels—A New Evaluation Procedure;Kaupper;CIRP Ann.,2013
5. The Deformation and Fracture Behavior of 316L SS Fabricated by SLM under Mini V-Bending Test;Kale;Int. J. Mech. Sci.,2021
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献