Adsorption of 2,4-D and MCPA Herbicides on Carbon Black Modified with Hydrogen Peroxide and Aminopropyltriethoxysilane

Abstract

The carbon black N-220 surface was subjected to modification through H2O2 oxidation and deposition of aminopropyltriethoxysilane. The pristine (CB-NM) and modified materials (CB-Ox and CB-APTES) were characterized by N2 adsorption–desorption isotherms, scanning electron microscopy, energy-dispersive X-ray spectroscopy (SEM-EDS), thermogravimetry, and FTIR spectroscopy. Carbon black samples were applied as adsorbents for the removal of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) herbicides from aqueous solutions. The influence of their surface properties on adsorption efficiency was analyzed and discussed. The results showed that the adsorption of the herbicides was pH-dependent, and the most favorable adsorption was observed in an acidic environment. The experimental data best fit pseudo-second-order and Langmuir models for kinetic and equilibrium data, respectively. The adsorption rate of both the herbicides increased in the order of CB-APTES < CB-Ox < CB-NM and was closely correlated with the mesopore volume of the carbon blacks. The monolayer adsorption capacities were found to be 0.138, 0.340, and 0.124 mmol/g for the adsorption of 2,4-D and 0.181, 0.348, and 0.139 mmol/g for the adsorption of MCPA on CB-NM, CB-APTES, and CB-Ox, respectively. The results showed that the surface chemistry of the adsorbent plays a more important role than its porous structure. Both herbicides were preferably adsorbed on APTES-modified carbon black and were adsorbed the worst on oxidized carbon black (CB-APTES > CB-NM > CB-Ox).