Author:
Wunderlich Markus,Esper Alexander,Wirsum Manfred,Buchmann Klaus
Abstract
This paper presents results of strain gauge measurements, which have been carried out on a full-scale turbocharger test rig. Rotational speed of the turbocharger was ramped up and down through four preliminary anticipated rotor-blade resonances, with a known combination of main order of excitation and corresponding nodal diameter. An analysis of the transient data is presented. An investigation of spectra with high frequency resolutions, centered on individual blade resonance points in time, is presented. In contrast to former research, all blades resonate at the same point in time and thus at the same resonance frequency, if the excitation corresponds to a nodal diameter of zero. Strain data from the shaft is used to support findings, which, in other publications, often solely rely on strain data from individual blades.
Funder
Forschungsvereinigung Verbrennungskraftmaschinen
Subject
Mechanical Engineering,Energy Engineering and Power Technology,Aerospace Engineering
Reference15 articles.
1. Aerodynamic Interference Between Moving Blade Rows
2. The Unsteady Forces Due to Viscous Wakes in Turbomachines
3. Strömungsinduzierte Schaufelschwingungen in Radialturbinen mit beschaufeltem Spiralgehäuse: Zugl.: Karlsruhe, Univ., Diss, 2007; Forschungsberichte aus dem Institut für Thermische Strömungsmaschinen, Universität Karlsruhe (TH);Klaus,2007
4. Turbine Blade Vibration Measurement Methods for Turbocharges;Janicki;Am. J. Sens. Technol.,2014