Author:
Zhou Yuan-Kai,Jian Liang-Jhe,Su Guo-Dung John
Abstract
We present a design of a non-imaging system based on a ray-tracing methodology. This system is mainly made of polycarbonate, while part of its surface is coated with metal. The Zemax® optical simulation tool was used to calculate the optimal parameters of this system, such as heights, widths, and angles. This design aims to improve the light distribution uniformity of blended red-green-blue mini light-emitting diodes. Our simulation results show that this design can achieve 93% light distribution uniformity in a 36 mm × 36 mm area, and the height of this design is less than 5 mm.
Funder
Ministry of Science and Technology
Industrial Technology Research Institute
Subject
Inorganic Chemistry,Condensed Matter Physics,General Materials Science,General Chemical Engineering
Reference12 articles.
1. Wu, T., Sher, C.-W., Lin, Y., Lee, C.-F., Liang, S., Lu, Y., Huang Chen, S.-W., Guo, W., Kuo, H.-C., and Chen, Z. (2018). Mini-LED and Micro-LED: Promising Candidates for Next-Generation Display Technology. Appl. Sci., 8.
2. Effect of Micro-Structural Light Guide Plate on Source of Linearly Polarized Light;Lee;J. Light. Technol.,2011
3. Optimisation of Precision Injection Moulding Processing Parameters and Implementation of Quality Prediction System for LCD Light Guide Plate;Kuo;Polym. Polym. Compos.,2007
4. Optical design of the Fresnel lens for LED-driven flashlight;Chen;Appl. Opt.,2016
5. Elimination of flux loss by optimizing the groove angle in modified Fresnel lens to increase illuminance uniformity, color uniformity and flux efficiency in LED illumination;Kim;Opt. Express,2009