Numerical Simulation and Process Study on Laser Shock Peening of 1Cr18Ni9Ti Material

Abstract

This article mainly studies the improvement of the properties of the 1Cr18Ni9Ti material after laser shock peening. The 1Cr18Ni9Ti material is the main material used to make aviation ducts, and improving the fatigue life of aviation ducts can significantly improve the safety performance of aviation engines. The article combines simulation and experiment to study the improvement effect of laser shock peening on the material’s properties. The main results are as follows: The fatigue test showed that, under the same stress load, laser shock peening can greatly extend the fatigue life of the specimen, with the 3J process having the best effect. EBSD analysis showed that the 3J process has the best grain refinement effect. The X-ray diffraction method proved that the measurement results of residual compressive stress under the 3J process are optimal. Overall, it is shown that the properties of the 1Cr18Ni9Ti material can be greatly improved under the 3J process.