On the Feasibility of an LCD-Based Real-Time Converter for Ionizing Radiation Imaging
-
Published:2024-07-04
Issue:13
Volume:17
Page:3320
-
ISSN:1996-1944
-
Container-title:Materials
-
language:en
-
Short-container-title:Materials
Author:
Januszko Adam1, Zych Eugeniusz2, Piecek Wiktor3ORCID, Pellowski Witalis1ORCID, Bogdanowicz Krzysztof A.4ORCID, Iwan Agnieszka1ORCID
Affiliation:
1. Faculty of Security and Safety Research, General Tadeusz Kosciuszko Military University of Land Forces, Czajkowskiego 109, 51-147 Wroclaw, Poland 2. Faculty of Chemistry, University of Wroclaw, 14 F. Joliot-Curie Street, 50-383 Wroclaw, Poland 3. Faculty of Advanced Technologies and Chemistry, Military University of Technology, 00-908 Warsaw, Poland 4. Military Institute of Engineer Technology, Obornicka 136, 50-961 Wroclaw, Poland
Abstract
Here we present the cascade converter (CC), which provides real-time imaging of ionizing radiation (IoR) distribution. It was designed and manufactured with the simplest architecture, utilizing liquid crystal display (LCD) technology. Based on two merged substrates with transparent electrodes, armed with functional layers, with the cell filled with nematic liquid crystal, a display-like, IoR-stimulated CC was achieved. The CC comprises low-absorbing polymer substrates (made of polyethylene terephthalate—PET) armed with a transparent ITO electrode covered with a thin semipermeable membrane of polymer (biphenylperfluorocyclobutyl: BP-PFCB) doped with functional nanoparticles (NPs) of Lu2O3:Eu. This stack was covered with a photoconductive layer of α-Se and finally with a thin polyimide (PI) layer for liquid crystal alignment. The opposite substrate was made of LCD-type glass with ITO and polyimide aligning layers. Both substrates form a cell with a twisted structure of nematic liquid crystal (TN) driven with an effective electric field Eeff. An effective electric field driving TN structure is generated with a sum of (1) a bias voltage VBIAS applied to ITO transparent electrodes and (2) the photogenerated additional voltage VXray induced between ITO and α-Se layers with a NPs-doped BP-PFCB polymer layer in-between. The IoR (here, X-ray) conversion into real imaging of the IoR distribution was achieved in the following stages: (1) conversion of IoR distribution into non-ionizing red light emitted with functional NPs, (2) transformation of red light into an electric charge distributed in a layer of the photoconductive α-Se, which is what results in the generation of distributed voltage VXray, and (3) a voltage-mediated, distributed switching of the TN structure observed with the naked eye. The presented imaging device is characterized by a simple structure and a simple manufacturing process, with the potential for use as a portable element of IoR detection and as a dosimeter.
Funder
European Regional Development Fund Wroclaw Research Centre EIT+ University of Wroclaw
Reference75 articles.
1. Huignard, J.P., Le Berre, S., Mayeux, C., and Micheron, F. (1983). Liquid-Crystal Image Converter Device. (4368386A), U.S. Patent. 2. Rieppo, P., Bahadur, B., and Rowlands, J. (March, January 26). Amorphous selenium liquid crystal light valve for X-ray imaging. Proceedings of the Medical Imaging 1995, San Diego, CA, USA. 3. Germann, S., Stiles, J.A.R., Rowlands, J.A., Oakham, P., Webster, C.A., and Koprinarov, I. (2010). X-ray Light Valve Based Digital Radiographic Imaging Systems. (7687792), U.S. Patent. 4. Rieppo, P.-K.M., and Rowlands, J.A. (1998). Apparatus for Generating Multiple X-ray Images of an Object from a Single X-ray Exposure. (5847499), U.S. Patent. 5. Huang, Z.S. (1999). Flat Panel Detector for Radiation Imaging with Reduced Electronic Noise. (5929449), U.S. Patent.
|
|