Author:
Wang Xuhuai,Zhang Xiang,Yang Chen,Li Hao,Liu Yong
Abstract
In order to study the characteristics of pressure fluctuation during unstable combustion, experimental studies had been conducted on the mechanism model of the swirl combustor and the industrial swirl combustor. The signal of dynamic pressure, heat release rate, and the high-speed flame image in the two combustors were synchronously collected by using dynamic pressure sensors, a photoelectric sensor, and a high-speed camera under normal temperature and pressure. After empirical mode decomposition of the dynamic pressure signal, several intrinsic mode functions were obtained. It was found that the pressure pulsation energy is concentrated in the first three order intrinsic mode function. Through fast Fourier transform spectrum calculation, it was found that the first three order intrinsic mode function pulsation can characterize the changes of heat release rate and air flow pulsation under cold state and flame instability. It showed that the decomposition of the dynamic pressure in the combustor by this method can obtain the main physical processes in its connotation, and provide data processing methods for the induction mechanism of oscillating combustion and combustion diagnosis in an industrial combustor test.
Subject
Electrical and Electronic Engineering,Biochemistry,Instrumentation,Atomic and Molecular Physics, and Optics,Analytical Chemistry
Reference30 articles.
1. Combustion Dynamics and Instabilities: Elementary Coupling and Driving Mechanisms
2. Combustion Instabilities in Gas Turbine Engines;Lieuwen,2005
3. Investigation of Mode Shift Dynamics of Lean, Premixed Flames;Prakash;Proceedings of the 44th AIAA Aerospace Sciences Meeting and Exhibit,2006
4. The acoustic response of the combustion chamber;Natanzon,2005
5. Dynamics and stability of lean-premixed swirl-stabilized combustion;Ying;Prog. Energy Combust. Sci.,2009