Comparison of L-Shaped and U-Shaped Beams in Bidirectional Piezoelectric Vibration Energy Harvesting

Abstract

The traditional single degree of freedom linear piezoelectric vibration energy harvester (PVEH), such as the cantilever type, mainly works and resonates in a single direction and at a single frequency. To adapt broadband and bidirectional ambient vibration, this paper designs and compares two PVEHs of L-shaped beam and U-shaped beam through COMSOL simulation and prototype test. FEA modeling is introduced for accurate structure design with modal analysis, voltage frequency response analysis, and proof mass analysis with multiphysics electromechanical coupling simulation. Two PVEH prototypes with different gravity angles and clamping angles are tested at 0.1 g acceleration to find the optimal angle for maximum output power. The best clamping angle of L-PVEH is 135° with RMS power of 0.3 mW at 7.9 Hz, and that of U-PVEH is 45° with RMS power of 0.4 mW at 5.0 Hz. The proposed U-PVEH shows more advantages in low broadband and bidirectional vibration energy harvesting.