Author:
Yu Hongwei,Wu Kaiming,Dong Baoqi,Liu Jingxi,Liu Zicheng,Xiao Daheng,Jin Xing,Liu Hankun,Tai Minmin
Abstract
The effect of various heat inputs on the microstructure and impact toughness of the simulated coarse-grained heat-affected zone (CGHAS) of a niobium microalloyed (0.14 wt.%) low-carbon steel was studied. The results showed that higher impact toughness was achieved at a low heat input of 20 kJ/cm, which resulted from the formation of acicular ferrite laths/plates. They sectioned large prior austenite grains into many smaller regions, resulting in smaller crystallographic grains and high-angle grain boundaries. Conversely, when specimens were simulated with larger heat-inputs (100, 200 kJ/cm), the microstructure of the CGHAZ was predominantly composed of granular bainite plus massive MA constituents, thus impairing the impact toughness.
Subject
General Materials Science
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献