Abstract
The article presents the results of research on the influence of the natural moisture of a filament made of acrylonitrile–butadiene–styrene terpolymer (ABS) on the mechanical properties and quality of products fabricated with fused filament fabrication (FFF). The concept of the natural moisture of the filament was defined, and the range of its variability was identified in reference to the range of the natural ambient humidity. It is shown that a change in the ambient humidity by 10% resulted in a change in filament moisture by about 0.05%. The results of the research on the moisture variability of an ABS filament stored in a package, an airtight container, or a container with a moisture absorber are also discussed. The last part of the article presents the results of the research on the impact of the moisture of the filament in its natural range of variability on select mechanical properties of filaments and products made using FFT. It is shown that this impact was significant and had a value of 1 MPa on 0.1% filament moisture.
Funder
Polish Ministry of Science and Higher Education
Subject
General Materials Science
Reference42 articles.
1. Scaffaro, R., Citarrella, M.C., Gulino, E.F., and Morreale, M. (2022). Hedysarum coronarium-Based Green Composites Prepared by Compression Molding and Fused Deposition Modeling. Materials, 15.
2. Taufik, M. (2021). Advanced Manufacturing Systems and Innovative Product Design. Lecture Notes in Mechanical Engineering, Springer.
3. From rapid prototyping to home fabrication: How 3D printing is changing business model innovation;Rayna;Technol. Forecast. Soc. Chang.,2016
4. Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused filament fabrication with consumer-grade ABS;J Braz. Soc. Mech. Sci. Eng.,2021
5. Innovative design of a helmet based on reverse engineering and 3D printing;Wang;Alex. Eng. J.,2021
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献