Affiliation:
1. Department of Civil Engineering, National Institute of Technology, Rourkela 769008, India
2. School of Engineering, University of Basilicata, Viale dell’Ateneo Lucano, 10, 85100 Potenza, Italy
Abstract
In Kurnool district, due to the hot, arid climatic conditions, proper study of crop evapotranspiration and its effect on crop water demand for various crops is an extremely important issue. More focus will be given to the design and development of surface irrigation systems based mostly on furrow irrigation, as the rainfall pattern for this district was irregular in 2005. The crop water requirement and furrow irrigation design parameters for optimising the beneficial utilisation of available water resources and field performances are studied in this research. Some major crops, such as cotton, sugarcane, sorghum, maize, and sunflower, are considered when adopting a suitable furrow irrigation system for soil conditions of the types black clay, red loamy, and medium loam. The reference crop evapotranspiration was estimated for 2005 based on the Penman–Monteith equation as per FAO guidelines by the CROPWAT 8.0 model. Crop Water Requirement (CWR), Net Irrigation Requirement (NIR), and Gross Irrigation Requirement (GIR) were determined for available climatic and soil conditions. Soil surface characteristics were studied using AQUACROP 6.1 and compared with CROPWAT 8.0 for model accuracy. Various conservative and non-conservative crop characteristics were studied under limited set conditions, and correlation equations were developed between different parameters. Moreover, different furrow irrigation design parameters were considered by FURDEV (a module of the SURDEV model) for three modes of operation (i.e., fixed flow, cutback flow, and tailwater reuse method) under modified SCS (Soil Conservation Service) families of soil infiltration characteristics. NIR values were 200 mm, 1423.2 mm, 220 mm, 150 mm, and 150 mm for cotton, sugarcane, maize, sorghum, and sunflower, respectively. A maximum significant dry yield was observed for maize (13.586 tonnes/ha). Additionally, the maximum application efficiency and storage efficiency were obtained at 95.5% for sorghum and 99.3% for sunflower, which would be a beneficial outcome of this research. In general, the results of this research might be very effective for the irrigation authority of Kurnool District to plan suitable approaches for designing and developing proper water management systems.
Subject
Water Science and Technology,Aquatic Science,Geography, Planning and Development,Biochemistry
Reference28 articles.
1. Estimation of evapotranspiration and irrigation scheduling of Lentil (Lens Culinaris) using CROPWAT 8.0 Model for Anantapur district, Andhra Pradesh, India;Veeranna;J. AgriSearch,2017
2. Estimation of crop water requirement using CROPWAT software in Appapuram channel command under Krishna western delta;Satyanarayana;Int. J. Agric. Sci.,2016
3. Water level variations in fractured, semi-confined aquifers of Anantapur district, southern India;Reddy;J. Geol. Soc. India,2012
4. Estimation of water requirement for different crops using CROPWAT model in Anantapur region;Babu;Asian J. Environ. Sci.,2014
5. Ewaid, S.H., Abed, S.A., and Al-Ansari, N. (2019). Crop water requirements and irrigation schedules for some major crops in Southern Iraq. Water, 11.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献