Affiliation:
1. Suzhou Automotive Research Institute, Tsinghua University, Suzhou 215200, China
2. Automotive Engineering Research Institute, Jiangsu University, 301 Xuefu Road, Zhenjiang 212013, China
Abstract
Intelligentization is the development trend of the future automobile industry. Intelligentization requires that the dynamic control of the vehicle can complete the trajectory tracking according to the trajectory output of the decision planning the driving state of the vehicle and ensure the driving safety and stability of the vehicle. However, trajectory limit planning and harsh road conditions caused by emergencies will increase the difficulty of trajectory tracking and stability control of unmanned vehicles. In view of the above problems, this paper studies the trajectory tracking and stability control of distributed drive unmanned vehicles. This paper applies a hierarchical control framework. Firstly, in the upper controller, an adaptive prediction time linear quadratic regulator (APT LQR) path following algorithm is proposed to acquire the desired front-wheel-steering angle considering the dynamic stability performance of the tires. The lateral stability of the DDAUV is determined based on the phase plane, and the sliding surface, in the improved sliding mode control (SMC), is further dynamically adjusted to obtain the desired additional yaw moment for coordinating the path following and lateral stability. Then, in the lower controller, considering the slip and the working load of four tires, a comprehensive cost function is established to reasonably distribute the driving torque of four in-wheel motors (IWMs) for producing the desired additional yaw moment. Finally, the proposed control algorithm is verified by the hardware-in-the-loop (HIL) experiment platform. The results show the path following and lateral stability can be coordinated effectively under different driving conditions.
Funder
National Natural Science Foundation of China
State Key Laboratory of Intelligent Green Vehicle and Mobility
Opening Project of Automotive New Technique of Anhui Province Engineering Technology Research Center
Opening Project of National Engineering Laboratory of Energy-saving Motor & Control Technique of Anhui University
Reference39 articles.
1. Passive fault-tolerant path following control of autonomous distributed drive electric vehicle considering steering system fault;Chen;Mech. Syst. Signal Process.,2019
2. Stability control of electric vehicles with in-wheel motors by considering tire slip energy;Zhao;Mech. Syst. Signal Process.,2019
3. Coordination control of active front steering and direct yaw moment control based on stability judgment for AVs stability enhancement;Yao;Proc. IMechE Part D J. Automob. Eng.,2021
4. Estimation method of vehicle position and attitude based on sensor information fusion;Li;J. Jiangsu Univ. (Nat. Sci. Ed.),2022
5. Control strategy of adaptive cruise system for electric vehicle driven by hub motor;Li;J. Jiangsu Univ. (Nat. Sci. Ed.),2023
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献