Evaluation of Plastic Deformation Considering the Phase-Mismatching Phenomenon of Nonlinear Lamb Wave Mixing

Author:

Sun Maoxun1ORCID,Xiang Yanxun2,Shen Wei1,Liu Hongye3,Xiao Biao4,Zhang Yue5ORCID,Deng Mingxi6ORCID

Affiliation:

1. School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China

2. School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China

3. School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China

4. Shanghai Institute of Special Equipment Inspection and Technical Research, Shanghai 200062, China

5. School of Mechanical Engineering, Nantong University, Nantong 226019, China

6. College of Aerospace Engineering, Chongqing University, Chongqing 400044, China

Abstract

Nonlinear guided elastic waves have attracted extensive attention owing to their high sensitivity to microstructural changes. However, based on the widely used second harmonics, third harmonics and static components, it is still difficult to locate the micro-defects. Perhaps the nonlinear mixing of guided waves can solve these problems since their modes, frequencies and propagation direction can be flexibly selected. Note that the phenomena of phase mismatching usually occur due to the lack of precise acoustic properties for the measured samples, and they may affect the energy transmission from the fundamental waves to second-order harmonics as well as reduce the sensitivity to micro-damage. Therefore, these phenomena are systematically investigated to more accurately assessing the microstructural changes. It is theoretically, numerically, and experimentally found that the cumulative effect of difference- or sum-frequency components will be broken by the phase mismatching, accompanied by the appearance of the beat effect. Meanwhile, their spatial periodicity is inversely proportional to the wavenumber difference between fundamental waves and difference- or sum-frequency components. The sensitivity to micro-damage is compared between two typical mode triplets that approximately and exactly meet the resonance conditions, and the better one is utilized for assessing the accumulated plastic deformations in the thin plates.

Funder

National Natural Science Foundation of China

Scientific Research Projects of Shanghai Municipal Administration for Market Supervision

Shanghai Natural Science Foundation project of “Science and Technology Innovation Plan”

Publisher

MDPI AG

Subject

General Materials Science

Reference52 articles.

1. Koch, C.C. (2007). Nanostructured Materials: Processing, Properties, and Potential Applications, Elsevier. [2nd ed.].

2. Twinning and martensite in a 304 austenitic stainless steel;Shen;Mater. Sci. Eng. A,2012

3. Large plasticity in magnesium mediated by pyramidal dislocations;Liu;Science,2019

4. Effect of plastic deformation on nonlinear ultrasonic response of austenitic stainless steel;Zhang;Mater. Sci. Eng. A,2015

5. Method and analysis for determining yielding of titanium alloy with nonlinear Rayleigh surface waves;Guo;Mater. Sci. Eng. A,2016

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3