Recovery of Copper and Gold from Waste Printed Circuit Boards Using Monosodium Glutamate Supplemented with Hydrogen Peroxide

Abstract

This study aimed to recover copper and gold from a waste printed circuit board (WPCB) using monosodium glutamate (MSG) supplemented with a clean oxidizer(s) under 30 °C, 150 rpm, and an initial pH of 7.00. The solder mask of WPCBs needed to be removed before leaching. At the first leaching, 93% of copper was selectively leached from solder–mask–free WPCBs within 3 h using 0.75 M MSG with 0.50% (w/v) H2O2. Then, gold (86%) was extracted from the first residue for 3 h by 1 M MSG with 0.25% (w/v) H2O2. In the downstream process, 98–100% copper could be directly recovered within 5–6 h from the first leachate by electrowinning (EW). However, gold in the second leachate required separation and purification processes before EW. At 4 h, 98% gold was adsorbed onto the activated carbon. Most impurities were removed from gold-loaded activated carbon by pre-elution using 0.05 M EDTA for 0.5 h without gold release. Afterward, 99% gold was eluted by diluted aqua-regia within an hour. Finally, the gold could be harvested perfectly using EW for 2 h. This complete copper and gold recycling process delivers an innovative concept for hydrometallurgical study and has the potential to develop into a practical industry.