Abstract
Traffic calming measures (TCM) are placed in urban areas to improve road safety, and among them, vertical TCMs are widely employed. Many researches are focused on the influence of the geometry of each measure on speed reduction, but it is demonstrated that drivers forget its effect and speed up after it. Therefore, placing consecutive TCMs can help to maintain a safe area. However, scarce literature can be found about the adequate spacing between them. Hence, the aim of this paper is to analyze the adequate distance between TCMs. Various streets with variable distances and different vertical TCMs were evaluated in Poland and Spain, including raised crosswalks, raised intersections, speed humps and speed cushions. The intermediate point between two TCMs was selected as the place where the maximum speed is achieved. Results showed that there was a good correlation between the speeds at intermediate points and the distance between TCMs, with a determination coefficient around 0.80. For an 85th percentile of the speed under 50 km/h, a maximum distance of 200 m between TCMs is recommended, and for a value of 40 km/h, 75 m.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Cited by
20 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献