The Symmetric Nature of the Position Distribution of the Human Body Center of Gravity during Propelling Manual Wheelchairs with Innovative Propulsion Systems

Abstract

Objective: The main objective of the tests conducted was to analyze the position variability of the human body’s center of gravity during propelling the wheelchair, and to demonstrate the properties enabling the description of this variability by means of plane figures with a symmetry axis. A secondary objective was to show the impact of the used manual propulsion type and the wheelchair inclination angle in relation to the plane on the dimensions of the position variability areas of the center of gravity. Method and materials: Three patients participated in the research representing 50 centiles of anthropometric dimensions. Each patient carried out fifteen measurement tests on three wheelchairs for three inclination angles of the wheelchair frame in relation to the level. Each measurement test consisted of five propulsion cycles for which the positions of the center of gravity were determined with the sampling frequency of 100 Hz. The measured positions of the center of gravity were approximated with ellipses containing 95.4% of the measurements conducted, assuming their dimension scaling basis in the form of the double value of standard deviation defined based on the registered results. Results: Based on the measurements conducted, the average values of five ellipses parameters were determined for nine cases in which a variable was the type of wheelchair propulsion and its inclination angle in relation to the level. The area of the highest variability of the position of the center of gravity was measured for the wheelchair with a multispeed transmission. The average dimensions of the ellipse semi-axis amounted to 108.53 mm for the semi-axis a and 29.75 for the semi-axis b, the average position of the ellipse center amounted to x = 114.51 mm and y = −10.53 mm, and the average inclination angle of the ellipse α amounted to −6.92°. The area of the lowest variability of the position of the center of gravity was measured for the wheelchair with a hybrid transmission. In this case, the average dimensions of the ellipse semi-axis amounted to 64.07 mm for the semi-axis a and 33.85 for the semi-axis b; whereas, the average position of the ellipse center amounted to x = 245.13 mm and y = −28.24 mm, and the average inclination angle of the ellipse α amounted to −0.56°.