Author:
Sugiyama ,Sakuwa ,Ogino ,Sakamoto ,Shimoda ,Katoh ,Kimura
Abstract
In the present study, the production of propylene oxide (PO) from propylene via gas-phase epoxidation was investigated using various catalysts. Although Ag is known to be a highly active catalyst for the epoxidation of ethylene, it was not active in the present reaction. Both Al and Ti showed high levels of activity, however, which resulted in confusion. The present study was conducted to solve such confusion. Although the employment of MCM-41 modified with Ti and/or Al was reported as an active catalyst for epoxidation, the combination resulted in the formation of PO at a less than 0.1% yield. Since this research revealed that the acidic catalyst seemed favorable for the formation of PO, versions of ZSM-5 that were both undoped and doped with Na, Ti, and Ag were used as catalysts. In these cases, small improvements of 0.67% and 0.57% were achieved in the PO yield on H‒ZSM-5 and Ti‒ZSM-5, respectively. Based on the results of the Ti-dopant and acidic catalysts, Ag metal doped on carbonate species with a smaller surface area was used as a catalyst. As reported, Ag‒Na/CaCO3 showed a greater yield of PO at 1.29%. Furthermore, the use of SrCO3 for CaCO3 resulted in a further improvement in the PO yield to 2.17%. An experiment using CO2 and NH3 pulse together with SEM and TEM examinations for Ag‒Na/CaCO3 revealed that the greatest activity was the result of the greater particle size of metallic Ag rather than the acid‒base properties of the catalysts.
Subject
Physical and Theoretical Chemistry,Catalysis
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献