Affiliation:
1. Faculty of Mechatronics, Armament and Aerospace, Military University of Technology, 00-908 Warsaw, Poland
2. Airworthiness Division, Air Force Institute of Technology, 01-494 Warsaw, Poland
Abstract
This paper presents laboratory results on the influence of the magnetic field of an active magnetic bearing (AMB) on the eddy-current sensor operation. The magnetic suspension technology enables continuous diagnostics and monitoring of a rotary machine and eliminates drawbacks of classical bearing properties. The magnetic bearing system usually consists of two radial and one axial magnetic bearing. It is combined with a control unit, amplifiers and sensors for measuring the instantaneous position of the shaft. For this purpose, eddy-current sensors are frequently used. They operate in close proximity to the electromechanical actuators; therefore, the question arises whether the actuators do not interfere with the correct operation of these sensors. In the paper, the test rig and research plan prepared for that investigation are delivered. Measurement signals were registered from four control channels for different configurations of power supplies for system elements, e.g., with sensors and AMBs turned off, with sensors turn on and at normal work. Recorded time courses are presented and discussed in the paper. For the prepared test rig and AMB/eddy-current sensor configuration, no significant influence of the generated magnetic field from the support is found for the eddy-current sensor output.
Subject
Electrical and Electronic Engineering,Biochemistry,Instrumentation,Atomic and Molecular Physics, and Optics,Analytical Chemistry
Reference37 articles.
1. Control system with nonparametric predictive algorithm for the high-speed rotating machine with magnetic bearings;Szolc;Bull. Pol. Acad. Sci. Tech. Sci.,2021
2. Falkowski, K., Kurnyta-Mazurek, P., Szolc, T., and Henzel, M. (2022). Radial Magnetic Bearings for Rotor–Shaft Support in Electric Jet Engine. Energies, 15.
3. Experimental study on adaptability of full ceramic ball bearings under extreme conditions of cryogenics and heavy loads;Xia;Tribol. Int.,2022
4. Saucedo-Dorantes, J.J., Arellano-Espitia, F., Delgado-Prieto, M., and Osornio-Rios, R.A. (2021). Diagnosis methodology based on deep feature learning for fault identification in metallic, hybrid and ceramic bearings. Sensors, 21.
5. Semi-active and active magnetic stabilisation of supercritical rotor dynamics by contra-rotating damping;Brusa;Mechatronics,2014
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献