Non-Traditional Layout Design for Robotic Mobile Fulfillment System with Multiple Workstations

Abstract

This paper studies the layout design of a robotic mobile fulfillment system with multiple workstations. This is a parts-to-picker storage system where robots hoist pods and bring them directly to the workstations for stationary pickers to retrieve required items. As few research efforts have focused on determining the optimal locations of workstations in such systems, we develop an integer programming model to determine the location of workstations to minimize the total traveling distance of robots. In addition, we investigate the near-optimal workstation location patterns (i.e., some general workstation configuration rules) in the context of both traditional and flying-V layouts. A series of experiments led to the following findings: (1) the flying-V layout can save 8∼26% of travel distance compared with the traditional layout, and the sacrifice of space use is only 2∼3% for medium or large warehouses; (2) instead of solving the optimization model, the proposed 2n rule and n+1 rule are simple and easily implemented ways to locate workstations, with travel distance gaps of less than 1.5% and 5% for traditional and flying-V layouts, respectively; and (3) the “optimal” cross-aisle angle (i.e., θ) in flying-V layout can be set as large as possible as long as the cross-aisle intersects the left or right edge of the warehouse.