Abstract
Due to their attractive properties, such as high energy and power density, Lithium-ion batteries are currently the most suitable energy storage system for powering portable electronic equipment, electric vehicles, etc. However, they are still affected by safety and stability problems that need to be solved to allow a wider range of applications, especially for critical areas such as power networks and aeronautics. In this paper, the issue of overdischarge abuse has been addressed on Lithium-ion cells with different anode materials: a graphite-based anode and a Lithium Titanate Oxide (LTO)-based anode model. Tests were carried out at different depths of discharge (DOD%) in order to determine the effect of DOD% on cell performance and the critical conditions that often make the cell fail irreversibly. Tests on graphite anode cells have shown that at DOD% higher than 110% the cell is damaged irreversibly; while at DOD% lower than 110% electrolyte deposits form on the anodic surface and structural damage affects the cathode during cycling after the overdischarge. Furthermore, at any DOD%, copper deposits are found on the anode. In contrast with the graphite anode, it was always possible to recharge the LTO-based anode cells and restore their operation, though in the case of DOD% of 140% a drastic reduction in the recovered capacity was observed. In no case was there any venting of the cell, or any explosive event.
Funder
Italian Ministry of Economic Development
ENEA
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献